Effectiveness and predictability of treatment with clear orthodontic aligners: A scoping review.

INTRODUCTION: In an ideal clinical setting, orthodontic therapy with clear aligners (CA) should improve the patients' initial malocclusion and must guarantee equivalence between the results predicted and those obtained clinically to be considered an effective treatment. Therefore, this scoping review aimed to identify the orthodontic literature concerning the effectiveness and predictability of CA treatments. METHODS: A systematic computerized search was performed in 3 databases: PubMed, Scopus, and Embase. Inclusion criteria selected observational and clinical studies performed in at least 10 adult orthodontic patients, whose results of CA treatment's effectiveness and/or predictability were assessed. RESULTS: The 3 database computerized searches resulted in 1,553 articles, and 169 full texts were considered potentially relevant. After applying the eligibility criteria, 33 studies were included. Most studies (76%) were designed as cohort studies and have been published in the last 5 years (79%). The majority included only non-extraction treatments (73%), and 79% reported results achieved with the Invisalign® system. The most predictable movement was the buccolingual tipping, while the least predictable movements were rotation, intrusion, and extrusion. Aligner treatment was effective for mild to moderate crowding resolution, and the success of overbite correction still seems to be limited. CONCLUSIONS: The studies have demonstrated improvement of initial malocclusion through CA treatments. Still, predictability degree is overestimated and does not accurately reflect the occlusion immediately at the end of treatment. In future studies, there should be an effort to broaden the utilization of alternative aligner systems beyond Invisalign® and broadly disseminate their outcomes to strengthen clear aligners evidence base.

Pre-cementation treatment of glass-ceramics with vacuum impregnated resin coatings.

OBJECTIVE: The study aimed to investigate the effectiveness of a vacuum impregnation process to eliminate the porosity at the ceramic-resin interface to optimize the reinforcement of a glass-ceramic by resin cementation. METHODS: 100 leucite glass-ceramic disks (1.0 ± 0.1 mm thickness) were air-abraded, etched with 9.6 % HF acid, and silanated. Specimens were randomly allocated to 5 groups (n = 20). Group A received no further treatment (uncoated control). Groups B and D were resin-coated under atmospheric pressure, whereas groups C and E were resin-coated using vacuum impregnation. The polymerized resin-coating surfaces of specimens in groups B and C were polished to achieve a resin thickness of 100 ± 10 µm, while in groups D and E no resin-coating modification was performed prior to bi-axial flexure strength (BFS) determination. Optical microscopy was undertaken on the fracture fragments to identify the failure mode and origin. Comparisons of BFS group means were made by a one-way analysis of variance (ANOVA) and post-hoc Tukey test at α = 0.05. RESULTS: All resin-coated sample groups (B-E) showed a statistically significant increase in mean BFS compared with the uncoated control (p < 0.01). There was a significant difference in BFS between the ambient and vacuum impregnated unpolished groups (D and E) (p < 0.01), with the greatest strengthening achieved using a vacuum impregnation technique. SIGNIFICANCE: Results highlight the opportunity to further develop processes to apply thin conformal resin coatings, applied as a pre-cementation step to strengthen dental glass-ceramics.

Intrusion of overerupted periodontally compromised posterior teeth using orthodontic mini implants: A mechanobiological finite element study.

INTRODUCTION: The intrusion of posterior teeth had been considered challenging up to the development of orthodontic mini implants. In periodontally compromised teeth, the challenge is even greater, because of the root resorption risk due to periodontal ligament over-compression. Still, the precise strategy to determine the force reduction level remains uncertain. OBJECTIVE: The objective of the study was to determine, by a finite element analysis (FEA), the force reduction needed to avoid root resorption and maintain the efficiency of orthodontic mechanics of periodontally compromised teeth similar to the sound one. METHODS: An anatomical model was constructed representing a premolar inserted into a maxillary bone. Based on the initial model (R0), three bone height loss conditions were simulated (R2 = 2 mm, R4 = 4 mm, and R6 = 6 mm). Two intrusive movements were simulated: pure intrusion (bilateral mini implant) and uncontrolled-tipping intrusion (buccal mini implant). The hydrostatic stress at the periodontal ligament was used to evaluate the risk of root resorption due to over-compression. RESULTS: For bilateral mini implant intrusion, the force had to be decreased by 16%, 32% and 48% for R2, R4 and R6, respectively. For buccal mini implant intrusion, the required reductions were higher (20%, 36% and 56%). A linear relationship between the intrusive force reduction and the alveolar bone height loss was observed in both intrusion mechanics. CONCLUSIONS: According to the FE results, 8% or 9.3% of force reduction for each millimetre of bone height loss is suggested for intrusion with bilateral or buccal mini implant, respectively. The buccal mini implant anchorage must be associated with a supplemental strategy to avoid buccal crown tipping.

Peri-implant bone resorption risk of anterior maxilla narrow single implants: a finite-element analysis.

Statement of the problem: Narrow implants have been recommended in high esthetic demand regions to ensure greater buccal bone thickness (BBT) and minimize soft-tissue recession due to insufficient bone support. However, a limited area of bone-implant interface can increase the risk of peri-implant bone resorption due to occlusal forces. Purpose: This article encourages the use of evidence-based finite element analysis to optimize the aesthetic outcomes in maxillary lateral incisor single-supported implant crown by accurate biomechanical planning. This study aimed to analyze the best implant dimensions that would preserve the maximum BBT and avoid peri-implant bone resorption due to occlusal forces. Materials and methods: A maxilla segment was constructed based on anthropological measurements. Four implant diameters (Ø = 3.25; 3.50; 3.75 or 4.00 mm) and two lengths (L = 10 or 13 mm) were simulated. The occlusal force parameters were defined to simulate clinical conditions. The bone resorption risk analysis was based on Frost's mechanostat theory altering the strain output to strain energy density (SED). The peri-implant bone resorption risk indexes (PIBRri) were calculated by dividing the average of the top ten SED elements of the cortical and trabecular buccal wall by the pathologic resorption limit for each bone. Results: For trabecular bone, only the model Ø4.00L13 exhibited a low PIBRri. For cortical bone, all models presented a low PIBRri, except for models Ø3.25. Conclusion: The selection of a 3.25 mm dental implant to preserve a 2 mm BBT should be avoided since it generates a high peri-implant bone resorption risk induced by occlusal overload.

Dentists' awareness and knowledge of evidence- based dentistry principles, methods and practices: a systematic review.

Introduction As an attempt to provide supporting evidence for the formulation of future educational strategies on knowledge translation, this systematic review assessed and synthesised the available evidence related to the dentists' awareness, perceived and actual knowledge of evidence-based dentistry (EBD) principles, methods and practices.Methods Primary studies that considered dentists' reports collected from interviews, questionnaires, or conversation sessions were selected. Studies enrolling students, dental hygienists, or other health professionals were not included. Reviews, editorials, letters, study protocols, articles presenting knowledge translation strategies and initiatives, examples of EBD approaches to specific clinical questions, and guidelines focused on EBD implementation were also excluded. Cochrane, Embase, PubMed, Scopus and Web of Science databases were searched. Grey literature was partially covered by the Google Scholar search and the reference lists of the pre-selected studies. The study search was concluded in February 2021. Descriptive data of the selected studies were synthesised, and the risk of bias was assessed according to the National Institutes of Health Quality Assessment Tool for observational cohort and cross-sectional studies.Results Twenty-one articles were included. High percentages of dentists were aware of EBD. Variable proportions of professionals declared to have some understanding of EBD, although few presented actual knowledge of principles, methods and practices.Discussion Methodologically, most studies presented limitations regarding sample representativity, participation rates, detailing of the outcome measures, and validation of the assessment tools. Additionally, extensive overall ranges of responses were often observed across the studies, possibly as a result of heterogeneity across samples and assessment tools. The authors thus suggest developing valid questionnaires including all dimensions (awareness, perceived knowledge and actual knowledge) within an assessment tool. This would contribute to establishing knowledge translation strategies to overcome specific gaps in EBD knowledge.

Experimental composite containing silicon dioxide-coated silver nanoparticles for orthodontic bonding: Antimicrobial activity and shear bond strength.

OBJECTIVE: This study aimed to investigate the antimicrobial activity and shear bond strength (SBS) of orthodontic brackets to bovine enamel using experimental composites with different concentrations of silicon dioxide-coated silver nanoparticles (Ag@SiO2 NPs). METHODS: Fifty bovine incisors were divided into five groups according to the composite (n = 10): G1 - Control Group (Transbond XT Resin), G2 - Experimental composite without Ag@SiO2 NPs; G3 - Experimental composite with 0.5% of Ag@SiO2 NPs; G4 - Experimental composite with 1% of Ag@SiO2 NPs; G5 - Experimental composite with 3% of Ag@SiO2 NPs. The SBS test was performed using a universal mechanical testing machine, and the adhesive remnant index (ARI) was analyzed by optical microscopy. For the antimicrobial activity evaluation, Streptococcus mutans (S. mutans) biofilm was formed for three days in hydroxyapatite discs. Posteriorly, S. mutans colony forming units (CFU) were evaluated. For SBS analysis, Analysis of Variance was used, followed by the Tukey test, at a 5% statistical significance level. The CFU data were analyzed by Kruskal-Wallis, followed by Dunn as a post-hoc test. The ARI results were analyzed descriptively. RESULTS: There was no statistically significant difference in SBS values between the experimental and control groups (p>0.05). A 3% incorporation of Ag@SiO2 NPs statistically reduced the SBS values (p<0.05) compared to the 1% group. The addition of 3% of Ag@SiO2 NPs to the composites significantly reduced S. mutans biofilm formation, compared to group G2 (p<0.05). CONCLUSION: Composites incorporating 3% of Ag@SiO2 NPs presented similar SBS values compared to the control group, and showed significant antimicrobial activity.

Experimental composite containing silicon dioxide-coated silver nanoparticles for orthodontic bonding: Antimicrobial activity and shear bond strength

ABSTRACT Objective: This study aimed to investigate the antimicrobial activity and shear bond strength (SBS) of orthodontic brackets to bovine enamel using experimental composites with different concentrations of silicon dioxide-coated silver nanoparticles (Ag@SiO2 NPs). Methods: Fifty bovine incisors were divided into five groups according to the composite (n = 10): G1 - Control Group (Transbond XT Resin), G2 - Experimental composite without Ag@SiO2 NPs; G3 - Experimental composite with 0.5% of Ag@SiO2 NPs; G4 - Experimental composite with 1% of Ag@SiO2 NPs; G5 - Experimental composite with 3% of Ag@SiO2 NPs. The SBS test was performed using a universal mechanical testing machine, and the adhesive remnant index (ARI) was analyzed by optical microscopy. For the antimicrobial activity evaluation, Streptococcus mutans (S. mutans) biofilm was formed for three days in hydroxyapatite discs. Posteriorly, S. mutans colony forming units (CFU) were evaluated. For SBS analysis, Analysis of Variance was used, followed by the Tukey test, at a 5% statistical significance level. The CFU data were analyzed by Kruskal-Wallis, followed by Dunn as a post-hoc test. The ARI results were analyzed descriptively. Results: There was no statistically significant difference in SBS values between the experimental and control groups (p>0.05). A 3% incorporation of Ag@SiO2 NPs statistically reduced the SBS values (p<0.05) compared to the 1% group. The addition of 3% of Ag@SiO2 NPs to the composites significantly reduced S. mutans biofilm formation, compared to group G2 (p<0.05). Conclusion: Composites incorporating 3% of Ag@SiO2 NPs presented similar SBS values compared to the control group, and showed significant antimicrobial activity.

RESUMO Objetivo: O presente estudo objetivou investigar a atividade antimicrobiana e a resistência de união ao cisalhamento (RU) de braquetes ortodônticos colados em esmalte bovino, utilizando compósitos experimentais com diferentes concentrações de nanopartículas de prata revestidas com dióxido de silício (NPs Ag@SiO2). Material e Métodos: Cinquenta incisivos bovinos foram divididos em cinco grupos, de acordo com o compósito utilizado (n = 10): G1 - Grupo Controle (Resina Transbond XT); G2 - Compósito Experimental sem NPs Ag@SiO2; G3 - Compósito Experimental com 0,5% de NPs Ag@SiO2; G4 - Composto Experimental com 1% de NPs Ag@SiO2; e G5 - Compósito Experimental com 3% de NPs Ag@SiO2. O teste de RU foi realizado em máquina universal de ensaios mecânicos, e o índice de adesivo remanescente (IAR) foi analisado por microscopia óptica. Para a avaliação da atividade antimicrobiana, biofilme de S. mutans foi formado por três dias em discos de hidroxiapatita. Posteriormente, foram avaliadas as unidades formadoras de colônias (UFC) de S. mutans. Para a análise de RU, foi utilizada a Análise de Variância, seguida do teste de Tukey, com nível de significância estatística de 5%. Os dados de UFC foram analisados por meio do teste de Kruskal-Wallis, seguido do teste post-hoc de Dunn. Os resultados de IAR foram analisados descritivamente. Resultados: Não houve diferença estatisticamente significativa nos valores de RU entre os grupos experimentais e o grupo controle (p> 0,05). A incorporação de 3% de NPs Ag@SiO2 reduziu estatisticamente os valores de RU (p< 0,05), em comparação ao grupo com 1%. A adição de 3% de NPs Ag@SiO2 ao compósito reduziu significativamente a formação de biofilme de S. mutans, em relação ao grupo G2 (p< 0,05). Conclusão: Os compósitos com incorporação de 3% de NPs Ag@SiO2 apresentaram valores de RU semelhantes ao grupo controle e demonstraram significativa atividade antimicrobiana.

Streptococcus mutans adherence to conventional and self-ligating brackets: an in vitro study.

INTRODUCTION: Although self-ligating brackets presumably provide better hygiene conditions, no consensus has been reached so far. OBJECTIVE: Therefore, the objective of this study was to evaluate, in an in vitro experimental design, the adherence of Streptococcus mutans (SM) in self-ligating and conventional brackets of different manufacturers and ligature types. METHODS: Four commercial brands of maxillary premolar metal brackets were tested (Abzil®; Morelli®; 3M Unitek®; and GAC®). Each one was subdivided into three groups, which varied according to the type of ligature and bracket model (metallic, elastic, and self-ligating), totalizing twelve groups, composed of six brackets each. Previously sterilized brackets were initially immersed in saliva for one hour, and subsequently washed and added in a bacterial suspension, maintained in aerobiosis for 72 hours. The adhered bacteria were then separated and quantified by colony forming units (CFU/mL) counting after 48 hours of growth. The groups were compared by Kruskal-Wallis and Dunn post-hoc tests (p< 0.05). RESULTS: Regardless of the commercial brand, self-ligating brackets had significantly less CFU/mL. However, according to comparisons performed within each commercial brand, only Abzil® self-ligating brackets had significantly lower biofilm adhesion. Among all of the self-ligating models, GAC® brackets presented the highest bacterial adhesion rate. CONCLUSIONS: Self-ligating brackets are likely to present lower rates of biofilm adhesion. Particularly, Abzil® and GAC® self-ligating brackets are less likely to accumulate biofilm. Although such results are derived from an in vitro study, practitioners might acknowledge findings concerning bacterial adhesion as one of the relevant features to be considered during bracket selection.

Orthodontically induced root resorption: A critical analysis of finite element studies' input and output.

INTRODUCTION: Orthodontically induced inflammatory root resorption (OIIRR) constitutes an undesirable risk connected to orthodontic treatment. Finite element analysis (FEA) is a powerful tool to study the risk of OIIRR. However, its efficiency in predicting OIIRR depends on the insertion of the correct inputs and the selection of an output coherent with the clinical failure mechanism. METHODS: By combining a systematic review with a 3-dimensional FEA, this article discusses which are the implications of using certain periodontal ligament (PDL) properties (linear and nonlinear models) and failure criteria. Six orthodontic loading regimes were simulated in a maxillary premolar: pure intrusion, buccal tipping, and their combination applied with either a light (25 cN) or a heavy (225 cN) force. Three stress parameters in the PDL were compared: von Mises stress, minimum principal stress, and hydrostatic stress (σH). RESULTS: The comparison between linear and nonlinear models showed notable differences in stress distribution patterns and magnitudes. For the nonlinear PDL, none of the light-force models reached the critical compressive hydrostatic stress of 4.7 kPa, whereas all the heavy-force models reached it. In addition, the regions of critical compressive σH matched with the regions with resorption craters in clinical studies. In linear models, the σH critical value of 4.7 kPa was reached even in the light-force scenario. CONCLUSIONS: Only compressive hydrostatic stress in PDL satisfied the requirements to be used as an FEA indicator of OIIRR. However, the requirements were satisfied only when a nonlinear PDL model was considered.

Can maxilla and mandible bone quality explain differences in orthodontic mini-implant failures?

Purpose: This study aimed to compare the risk of orthodontic mini-implant (OMI) failure between maxilla and mandible. A critical analysis of finite-element studies was used to explain the contradiction of the greatest clinical success for OMIs placed in the maxilla, despite the higher quality bone of mandible. Materials and Methods: Four tridimensional FE models were built, simulating an OMI inserted in a low-dense maxilla, control maxilla, control mandible, and high-dense mandible. A horizontal force was applied to simulate an anterior retraction of 2 N (clinical scenario) and 10 N (overloading condition). The intra-bone OMI displacement and the major principal bone strains were used to evaluate the risk of failure due to insufficient primary stability or peri-implant bone resorption. Results: The OMI displacement was far below the 50-100 µm threshold, suggesting that the primary stability would be sufficient in all models. However, the maxilla was more prone to lose its stability due to overload conditions, especially in the low-dense condition, in which major principal bone strains surpassed the pathologic bone resorption threshold of 3000 µstrain. Conclusions: The differences in orthodontic mini-implant failures cannot be explained by maxilla and mandible bone quality in finite-element analysis that does not incorporate the residual stress due to OMI insertion.

In vitro evaluation of enamel surface roughness and morphology after orthodontic debonding: Traditional cleanup systems versus polymer bur.

INTRODUCTION: The primary aim of this randomized in vitro study was to compare the effectiveness of carbide, fibreglass and polymer burs on resinous remnant removal after bracket debonding, by the evaluation of enamel surface roughness and morphology. The secondary objective was to compare the time dispended on the procedures. METHODS: The buccal surfaces of 28 bovine incisors were analysed by a profilometer to initial roughness measurement (Ra-T1). Brackets were bonded with a light-cured resin and debonded with a debonding plier. The samples were randomly divided into four groups, according to the bur used (n=7): A-Tungsten carbide; B-Fibreglass; C-Polymer; D-Polymer with 75% ethanol pre-treatment. The second roughness measurements were made after resin removal (Ra-T2). Time for removal procedures was also recorded. The third measurements were made after polishing (Ra-T3). Scanning Electronic Microscopy was performed in two samples of each group: after resin removal and after polishing. Results of roughness and time measurements were statically analysed by analysis of variance with post-hoc Bonferroni. RESULTS: After polishing, tungsten carbide (P=0.1555) and fibreglass burs provided final surface roughness statistically similar to the baseline condition (P=1.0000). Yet, polymer burs, associated (P<0.0001) or not to alcohol (P<0.0001), provided surface roughness significantly higher when compared to baseline values. Polymer burs were more time-consuming on resinous remnant removal than tungsten carbide and fibreglass burs (P<0.05). CONCLUSION: Polymer burs were less effective and more time-consuming to remove the remaining resin than tungsten carbide and fibreglass burs. The polishing step created smoother surfaces regardless of the burs used for resin removal.

Barriers involved in the application of evidence-based dentistry principles: A systematic review.

BACKGROUND: The authors' objective in this systematic review was to investigate the barriers involved in the application of evidence-based dentistry principles, as reported by dentists. The authors registered the protocol in the PROSPERO database. TYPES OF STUDIES REVIEWED: Eligible studies included qualitative and quantitative approaches, constituting information about barriers, collected through interviews, questionnaires, or conversation sessions. The authors searched databases and reference lists of preselected studies. After the selection process, the authors evaluated the included studies for potential risk of bias and collected either qualitative or quantitative data. RESULTS: After the selection process, the authors included 35 studies, of which 16 were reported in this article. The authors synthesized and classified the barriers in 4 categories: self-related, evidence-related, context-related, and patient-related barriers. Shortage of time and financial constraints were the barriers most frequently studied. However, the quantification of these barriers, as well as others, was not possible because of the variability of the results and methodological issues of the included studies. CONCLUSIONS AND PRACTICAL IMPLICATIONS: The authors suggest the development of valid questionnaires and their use in representative samples to quantify the effects of specific barriers. The authors encourage practitioners to participate in educational programs focused on training in evidence-based dentistry abilities, in addition to seeking accessible and synthesized formats of reliable scientific knowledge.

Comparison of the Condyle Sagittal Position of Class I and Class II Division 2 in Orthodontic Patients.

AIM: To compare the condyle sagittal position of class I and class II division 2 in orthodontic patients. MATERIALS AND METHODS: Fifty orthodontic cases (30 females and 20 males; 12-31 years) from the records of an Orthodontic Graduate Program were collected. Such cases presented cone-beam computed tomography (CBCT) as part of their initial diagnostic examinations. The study sample constituted two groups, i.e. class I and class II division 2 groups. A previously calibrated examiner performed the measurements of the images, representing the distance between the condyle and the articular surface of the glenoid fossa, both anteriorly (anterior disk space-ADS) and posteriorly (posterior disk space-PDS). Descriptive statistics were performed. Data were normally distributed, and parametric tests were used. Paired sample test was used to identify differences between the right and the left joints. Differences between class I and class II/2 groups were tested using independent t test. All statistical tests were interpreted at 5% significance level. RESULTS: When the study groups were compared in relation to the dimensions observed for the right and the left ADS and PDS, no significant differences were detected. This study also calculated the differences between right and left disk spaces within the groups, and the differences were not significant for both class I and class II/2 groups. CONCLUSION: The results demonstrated, after the performance of a CBCT comparative analysis, that there is no significant difference between class II/2 and class I orthodontic patients in relation to the condyle sagittal position. CLINICAL SIGNIFICANCE: The results collected here refute the expectation of spontaneous mandibular anterior repositioning after correcting the overbite in class II/2 patients.

A escolha do bráquete e a importância do seu posicionamento para o tratamento ortodôntico ­ relato de caso / Bracket choice and the importance of its placement for orthodontic treatment outcome ­ case report

Resumo O caso apresentado demonstra uma opção de posicionamento de bráquete que facilita e auxilia na obtenção de torque adequado, salientando a importância da escolha do bráquete para auxiliar na mecânica ortodôntica. A paciente reportada foi diagnosticada como face curta e apresentava espaços nos arcos superior e inferior para serem fechados e uma pronunciada inclinação lingual dos incisivos inferiores, que não seria beneficiada pela mecânica necessária para o fechamento dos espaços. Com uma combinação de bráquetes com torque negativo dos incisivos inferiores posicionados invertidos e mecânica de retração com fios de alto calibre e rígidos, os espaços foram fechados com melhora do torque dos incisivos, mesmo em situação adversa e uma boa oclusão e estética do sorriso foram possíveis de obter. Conclui-se que a individualização no posicionamento do bráquete ajuda sobremaneira na obtenção de um resultado satisfatório, compensando dificuldades de controle de torque pela combinação fio/bráquete (AU)

Abstract This case report demonstrates an option to get the proper torque, by changing the bracket placement and highlight the importance of bracket choice for mechanics. The case reported is a short face patient with spaces to close and had a pronounced lingual inclination of the lower incisors that was not benefited by the necessary mechanics. Through the combined use of brackets with -6 degrees of torque, placed upside down and sliding mechanics with a rigid wire, the spaces were closed improving torque instead of worsening it, and a proper occlusion with a pleasant smile could be achieved. Some individualization on bracket placement can help mechanics to get the desired tooth position, overcoming an inadequate torque control by the bracket/archwire combination (AU)

Association of Breastfeeding Duration, Nonnutritive Sucking Habits, and Malocclusion.

AIM: This study aimed to investigate the associations between breastfeeding, nonnutritive sucking habits (NNSHs), and malocclusion in deciduous, mixed, and permanent dentition. MATERIALS AND METHODS: A sample of 50 children between 3 and 12 years, enrolled in a pediatric dentistry dental care program, underwent orthodontic examination for detection of occlusal patterns and malocclusion. In addition, data regarding breastfeeding duration and NNSH acquisition were obtained from standardized questionnaires responded by the children's parents or legal guardians. RESULTS: Regardless of a long period of breastfeeding, a high incidence of NNSH in the evaluated sample was observed. Nevertheless, the presence of NNSHs was not significantly associated with malocclusion. CONCLUSION: The findings could not indicate a statistically significant association between breastfeeding duration, acquisition of NNSHs, and malocclusion. Longitudinal studies with larger samples are still needed to better support clinical decisions.How to cite this article: Roscoe MG, da Silva Bonifacio SV, da Silva TB, Pingueiro JMS, Lemos MM, Feres MFN. Association of Breastfeeding Duration, Nonnutritive Sucking Habits, and Malocclusion. Int J Clin Pediatr Dent 2018;11(1):18-22.

A 12-Year Retrospective Study of Avulsion Cases in a Public Brazilian Dental Trauma Service.

This study assessed the epidemiological characteristics and management of the permanent teeth avulsion cases attended in a Brazilian dental trauma service from December 2005 to August 2016. A retrospective study was conducted of case records of 93 patients involving 139 avulsed teeth. Data included sex, age, trauma etiology, location of the accident, number and position of avulsed teeth, and presence and type of associated traumatic lesions. Management of the avulsed teeth was addressed as: time elapsed until teeth were retrieved from the accident's location; teeth's cleaning method and storage media; time elapsed until seeking treatment and replantation. The majority of the patients were children from 6-10 (31.2%) and 11-15 years old (26.9%). Male patients were more affected than female. Bicycle accident was the main etiological factor (31.2%). In 56 (60.2%) cases, traumatic lesions to neighboring teeth were present. In 55 (59.1%) cases, lesions to adjacent soft tissues were reported. In 82 (88.2%) cases, patients requested treatment at the same day of the accident. Sixty-four teeth (46.0%) were immediately retrieved and 28 (20.1%) were not found. Forty-two teeth (30.2%) were kept dry. Only one tooth (0.7%) was immediately replanted at the accident's site, while 51 teeth (36.7%) were not replanted. Numerous avulsed teeth were inappropriately managed and immediate replantation was not frequent. Public policies must be created to raise awareness towards the particularities of avulsion cases.

A 12-Year Retrospective Study of Avulsion Cases in a Public Brazilian Dental Trauma Service

Abstract This study assessed the epidemiological characteristics and management of the permanent teeth avulsion cases attended in a Brazilian dental trauma service from December 2005 to August 2016. A retrospective study was conducted of case records of 93 patients involving 139 avulsed teeth. Data included sex, age, trauma etiology, location of the accident, number and position of avulsed teeth, and presence and type of associated traumatic lesions. Management of the avulsed teeth was addressed as: time elapsed until teeth were retrieved from the accident's location; teeth's cleaning method and storage media; time elapsed until seeking treatment and replantation. The majority of the patients were children from 6-10 (31.2%) and 11-15 years old (26.9%). Male patients were more affected than female. Bicycle accident was the main etiological factor (31.2%). In 56 (60.2%) cases, traumatic lesions to neighboring teeth were present. In 55 (59.1%) cases, lesions to adjacent soft tissues were reported. In 82 (88.2%) cases, patients requested treatment at the same day of the accident. Sixty-four teeth (46.0%) were immediately retrieved and 28 (20.1%) were not found. Forty-two teeth (30.2%) were kept dry. Only one tooth (0.7%) was immediately replanted at the accident's site, while 51 teeth (36.7%) were not replanted. Numerous avulsed teeth were inappropriately managed and immediate replantation was not frequent. Public policies must be created to raise awareness towards the particularities of avulsion cases.

Resumo Este estudo avaliou as características epidemiológicas e de manejo dos casos de avulsão de dentes permanentes atendidos em um serviço de trauma dental de dezembro de 2005 a agosto de 2016. Foi realizado um estudo retrospectivo de 93 casos, envolvendo 139 dentes avulsionados. Os dados incluíram sexo, idade, etiologia do trauma, localização do acidente, número e posição dos dentes avulsionados e presença e tipo de lesões traumáticas associadas. O manejo dos dentes foi abordado de modo a analisar: o tempo decorrido até que os dentes fossem recuperados do local do acidente; Método de limpeza dos dentes e meios de armazenamento; Tempo decorrido até a busca por tratamento e reimplante dental. A maioria dos pacientes eram crianças de 6-10 (31,2%) e 11-15 anos (26,9%). Os pacientes do sexo masculino foram mais acometidos que do feminino. O acidente de bicicleta foi o principal fator etiológico (31,2%). Em 56 (60,2%) casos, ocorreram lesões traumáticas aos dentes vizinhos. Em 55 (59,1%) casos foram relatadas lesões de tecidos moles. Em 82 (88,2%) casos, os pacientes solicitaram tratamento no mesmo dia do acidente. Sessenta e quatro dentes (46,0%) foram imediatamente recuperados e 28 (20,1%) não foram encontrados. Quarenta e dois dentes (30,2%) foram mantidos secos. Apenas um dente (0,7%) foi imediatamente reimplantado no local do acidente, enquanto 51 dentes (36,7%) não foram reimplantados. Numerosos dentes avulsionados foram manejados de forma inadequada e o reimplante imediato não foi frequente. Devem ser criadas políticas públicas para a conscientização da população sobre as particularidades dos casos de avulsão dental.

Efficiency of polymerization of bulk-fill composite resins: a systematic review.

This systematic review assessed the literature to evaluate the efficiency of polymerization of bulk-fill composite resins at 4 mm restoration depth. PubMed, Cochrane, Scopus and Web of Science databases were searched with no restrictions on year, publication status, or article's language. Selection criteria included studies that evaluated bulk-fill composite resin when inserted in a minimum thickness of 4 mm, followed by curing according to the manufacturers' instructions; presented sound statistical data; and comparison with a control group and/or a reference measurement of quality of polymerization. The evidence level was evaluated by qualitative scoring system and classified as high-, moderate- and low- evidence level. A total of 534 articles were retrieved in the initial search. After the review process, only 10 full-text articles met the inclusion criteria. Most articles included (80%) were classified as high evidence level. Among several techniques, microhardness was the most frequently method performed by the studies included in this systematic review. Irrespective to the "in vitro" method performed, bulk fill RBCs were partially likely to fulfill the important requirement regarding properly curing in 4 mm of cavity depth measured by depth of cure and / or degree of conversion. In general, low viscosities BFCs performed better regarding polymerization efficiency compared to the high viscosities BFCs.

Efficiency of polymerization of bulk-fill composite resins: a systematic review

Abstract This systematic review assessed the literature to evaluate the efficiency of polymerization of bulk-fill composite resins at 4 mm restoration depth. PubMed, Cochrane, Scopus and Web of Science databases were searched with no restrictions on year, publication status, or article's language. Selection criteria included studies that evaluated bulk-fill composite resin when inserted in a minimum thickness of 4 mm, followed by curing according to the manufacturers' instructions; presented sound statistical data; and comparison with a control group and/or a reference measurement of quality of polymerization. The evidence level was evaluated by qualitative scoring system and classified as high-, moderate- and low- evidence level. A total of 534 articles were retrieved in the initial search. After the review process, only 10 full-text articles met the inclusion criteria. Most articles included (80%) were classified as high evidence level. Among several techniques, microhardness was the most frequently method performed by the studies included in this systematic review. Irrespective to the "in vitro" method performed, bulk fill RBCs were partially likely to fulfill the important requirement regarding properly curing in 4 mm of cavity depth measured by depth of cure and / or degree of conversion. In general, low viscosities BFCs performed better regarding polymerization efficiency compared to the high viscosities BFCs.

Influence of Resin Cements on Color Stability of Different Ceramic Systems.

The purpose of this study was to evaluate color stability of two dental ceramics cemented with two resin cements, assessing the color difference (ΔE00) by the measurement of L*, a*, b*, c* and h* of transmittance. The combination of two ceramic system (feldspathic and lithium disilicate) and two resin cements - color A3 (RelyX ARC and Variolink II) resulted in 4 groups (n=5). Ten disks-shaped specimens were fabricated for each ceramic system (10x1.5 mm), etched with hydrofluoric acid (10%) and silanized prior to cementation. The color analysis was performed 24 h after cementation of the samples and after 6 months of storage in relative humidity by means of spectrophotometry. The ΔE00 values were analyzed statistically by two-way ANOVA followed by the Tukey test (p<0.05). One-way ANOVA were calculated for the means of individual color coordinates (L*, a*, b*, c* and h*). Two-way ANOVA showed that only the ceramic factor was significant (p=0.003), but there was no difference for the cement factor (p=0.275) nor for the ceramic/cement interaction (p=0.161). The feldspathic ceramic showed the highest values of ΔE00. Variations in L*, a*, b*, c* and h* were more significant for feldspathic ceramic. In conclusion, storage alters similarly the optical properties of the resin cements and feldspathic porcelain was more susceptible to cement color change after aging.